Видео

My 2012 A4 steering is stiff. No whines or noises. It's just stiff. I added power steering. No difference. Do you know what the issue is ?

my ABS light is not an issue, nor is it on. Only my VSA light is on. Do I have to do both these steps in an attempt to reset and fix my VSA light ?

Only one jetta swap??? 😔

Need timestamps

Surely a rare sight to behold indeed! I love these, even the older ones!

My steering is hard to trun and my red ligth is on and it says ..steering defective do not drive vehicles what is the problem what needs to be replaced and fix

What years are you talking about?

Worked first try on 2007 Honda ridgeline! Vsa light and triangle light came on after replacing the rack and pinion. 3 different auto mechanics looked at it and still on. I fixed it in 5min after watching this video. 🎉

I always wondered why it looked weird and extended in the back underneath. It looks nothing like any car I’ve ever seen.

Дуже дякую тобі, цілий тиждень не міг вирішити цю проблему, і я ще раз і ще раз дякую за цей туторіал

The Ford focus RS is not discontinued I asked Ford yesterday they are making a new one

Anyone know if this will work on a 01 CL type s?

Worked perfectly on my stepson's 2009 Rogue. Unlike the other videos that didn't work, your last step on holding down the accelerator again, made the difference. Thanks man.

Thank you very much by your video i resolve all my problems in my bmw God blessed you thank youuuuuuu

Thx bro. Install nostalgy mafia 2024 .🎉😊

“When people see you driving this car…you don’t look poor.” 😂 Where do I buy one??? 😊

Thank you finally worked on this video after trying so many other videos

Thank you man. My 05 tl . It worked perfectly. Subscribed .

I have a 2018 Camry where can I find these?

thanks it works:)

Do you have any pressure issues? I was worried that if I try to do this the. The air inside the pan will have nowhere to go

What’s faster

Idk if it’s cus I have a MT but this blew my ecu fuse and I had to replace it. Not sure why everyone had success but me.. like I said maybe cus my tsx is manual?? Idk

Helped so much thank you

Somebody wasn't using the grease fittings on those links!

I’ve never had to use a hammer to get the pads out.

Very professionell work thanks

Can anyone tell me the cylinder locations? I have a misfire in cylinder 4. I just want to change that plug and coil. It's my beater car so doing the cheap way. Probably won't have it for more than another year.

How long would you say the install is in total?

Thanks for info!

That’s not really a solution, Einstein.

Is this at all dangerous to do any risk to electronics

Good video and valid tips, however in this market you can';t expect to find a car that is mechanically perfect for under $2k and certainly not under 1k. For a 1k-2k car, a small oil leak, power steering leak, or jerky transmission is expected. Just make sure it drives properly and the issue is small enough that the car can be a daily beater and isn't about to be toast. For this budget you're looking for a beater and a beater has issues. If you insist on a perfect car under $2k you'll never find one imo

These "preparations" are like grafting Aya Nakamura's voice onto Montserrat Caballé's body... Another Fake Frankencar Porsche 911 ! 🤮

As another option if this doesn't work, disconnect the negative (-) cable, leave off for 20 minutes. Reconnect, start and drive. Sensors will reset.

This worked for me. Acura TL 06 6-speed.

Hi Jack, I sent you an email, hope you can help me

Yeah I've been having this problem since my car got towed. I think they used this as an tow point

Noice

Very helpful video as there is a whole difference between the threading for the rack part for the type S version of this car, on the type S it is a flare nut but on the non type S seen here its two 10mm bolts similar to how it is on the connection to the pump. just something to note as they are both 2nd gen TLs but one has a slightly different step when it comes to reconnecting the line that connects to the rack and not the pump.

Worked for me on Nissan Frontier 2009, too. Just a tip,if not successful first day or trying multiple times without success, just do it the next day. The best, leave the car parked overnight. Next day, It worked in the first attempt. Thanks for the video.

Did you do a coolant reroute on a mazdaspeed miata?

Thank you very much mate

Thank you for posting this. I had an oil drain plug bolt that wouldn't budge out of the oil pan. I hammered a socket to the bolt, and removed bolt. However, the bolt was stuck inside the socket. I watched your video, grabbed a hammer, and hammered the socket several times. The bolt released effortlessly. It saved me $$$.

Just did this on my 2008 tsx after the shop did a scan. Worked like a charm. Left the jumper in 4 and 9 for both steps and turned the ignition off in between. Closing the doors made it easier for me - less lights.

So is it five times on the break or seven times dude

Ah! The Red Bullet. And the steering is in the right place. 🤩

I see a BIG problem. Your steering wheel is on the wrong side. 😀

I had to change out a wheel stud on this car. Rust everywhere….took a while. Tough job.

Fixed it thankyou!!!😍😍